中文/Chinese 英语/English

FVDI J2534 Brief Introduction

FVDI J2534 is a vehicle communication interface device that full compatible with SAE J2534-1 and partly compatible with SAE J2534-2. It supports most of vehicle communication protocols and can be used as PassThru device for many dealer level diagnostic software. And it can be used as a ELM327 device also, support most of ELM327 software.

Highlights

  • High speed host communication. (3M bps)
  • Stable host communication. (with RTS/CTS flow control)
  • Automatically register software and no virtual machine needed.
  • Online software update and keep software latest always.
  • Online firmware update.
  • USB/802.11 selectable host communication.
  • Support ELM327 software by one device.

Comparison with other devices

Ford/Mazda IDS(•:Support All ;  ○:Support Parts)

 

Toyota TIS(•:Support All ;  ○:Support Parts)

Honda HDS (•:Support All ;  ○:Support Parts)

 

Technical specifications

a) Voltage & Current requirements

8~32VDC, 100 mA (max), 0.6 Watts @ 12 VDC

Note: protected against reverse battery polarity
b) Vehicle Protocols
ISO9141
ISO14230
J1850 VPW
J1850 PWM(Ford SCP)
ISO11898 HS(500K BPS)
ISO11898 MS(125K BPS)
ISO15765 HS(500K BPS)
ISO15765 MS(125K BPS)
FEPS(Flash EEPROM Program Signal)
Honda SCS
Honda DIAGH
KWP1281
J2819(TP2.0)

c)Supported software for J2534
Ford IDS V110
Mazda IDS V108
Toyota TIS V13.00
Honda HDS V3.102
Land Rover/Jaguar SDD2 V153
Nissan CONSULT III plus R2R V80.11

d)Supported software for ELM327
ELMconfig
Forscan
FOCCCUS
FF2

e)Vehicle Connection
Molded DLC3(OBDII-16)

f)Dimensions
H:22mm (0.87in) W:54mm (2.13in) L:76mm (2.99in)

g)Weight
50g (1.76oz)

h)Environmental
Operating: -20ºC to 45ºC (-4ºF to 113ºF) at 15% to 85% RH non-condensing

Appearance details

LED:
Work normal: Green LED blinks continuously slowly Firmware updating: Red LED blinks continuously quickly

PS Push Switch:
Pressed: works as ELM327 mode
Released: works as J2534 mode

 

 

Share this to